Musoq.DataSources.CANBus

Provides schema to work with CAN bus data.

Tables

A table in Musoq represents a structured data source with rows and columns. Each table provides access to specific data types and can be queried using the FROM clause (e.g., ‘FROM #source.table()’). Below are the available tables exposed by this data source:

can.separatedvalues(string csvData, string dbcData, string idOfType = “dec” | “hex” | “bin”)

Treats csv, tsv or others separated values files as CAN bus records. The file must be of format Timestamp, ID, DLC, Data where Data values must be in format of unsigned integer number (123) or in hexadecimal (0x7b). Based on the loaded dbc file, you will have access access to additional column named {DBC_MESSAGE_NAME}. From here, you can access value {DBC_SIGNAL_NAME} of a message (ie. {DBC_MESSAGE_NAME}.{DBC_SIGNAL_NAME}). Returned value will be of type double

This table’s structure is determined at runtime, meaning its columns and properties will vary based on the data source. However, the following core columns are always available:

Name	Type	Description
ID	uint	ID of the message entity
Timestamp	ulong	Timestamp of the message entity
Message	MessageEntity	The Message
IsWellKnown	uint	Whether the message is well known or not (is within dbc file)
DataAsBytes	byte[]	Data as bytes
Data	ulong	Data as ulong

can.messages(string dbc)

Parses dbc file and returns all messages defined within it.

Name	Type	Description
Id	uint	ID of the message entity
IsExtId	bool	Is external Id
Name	string	Name of the message entity
DLC	ushort	DLC of the message entity
Transmitter	string	Transmitter of the message entity
Comment	string	Comment for the message entity
CycleTime	int	Cycle time for the message entity
Signals	SignalEntity[]	Signals of the message

can.signals(string dbc)

Parses dbc file and returns all signals defined within it.

Name	Type	Description
Id	uint	Id of the signal entity
Name	string	Name of the signal entity
StartBit	ushort	Start bit of the signal entity
Length	ushort	Length of the signal entity
ByteOrder	byte	Byte order of the signal entity
InitialValue	double	Initial value of the signal entity
Factor	double	Factor for the signal entity
IsInteger	bool	Whether the signal entity is integer or not
Offset	double	Offset for the signal entity
Minimum	double	Minimum value for the signal entity
Maximum	double	Maximum value for the signal entity
Unit	string	Unit for the signal entity
Receiver	string[]	Receiver for the signal entity
Comment	string	Comment for the signal entity
Multiplexing	string	Multiplexing details for the signal entity
MessageName	string	Message name for the signal entity
ValueMap	string	Value map for the signal entity
MessageOrder	int	Order of signal within the message definition

Private Tables

Private tables are auxiliary data structures accessible only through CROSS APPLY or OUTER APPLY operators. They typically represent nested or related data structures within the primary table. While not directly queryable, these tables provide essential data relationships and hierarchical access patterns. Available private tables include:

ValueMapEntity[]

Represent possible values of a signal

Name	Type	Description
Value	int	Value of signal
Name	string	Name of the value

This Data Source Methods

Methods allow operations on columns or values within queries. They provide specific operations and transformations on your data (e.g., ‘SELECT Method(Column)’). The following methods are available in this data source:

Non aggregation methods

Non-aggregation methods process data on a row-by-row basis, performing calculations or transformations for each individual row. These methods return a result for each input row. The following non-aggregation methods are available:

ulong EncodeMessage(string name, byte value)

Converts bytes to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, short value)

Converts short to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, ushort value)

Converts ushort to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, int value)

Converts int to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, uint value)

Converts uint to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, long value)

Converts long to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, ulong value)

Converts ulong to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, float value)

Converts float to encoded signal of a message for CAN bus.

ulong EncodeMessage(string name, double value)

Converts double to encoded signal of a message for CAN bus.

ulong EncodeMessage(string jsonValues)

Converts structured json to encoded signals of a message for CAN bus. It’s structure is of { signalName1: signalValue1, ..., signalNameN : signalValueN }

double DecodeMessage(string name, byte value)

Treats byte as encoded signal of a message for CAN bus and decodes it.

double DecodeMessage(string name, short value)

Treats short as encoded signal of a message for CAN bus and decodes it.

double DecodeMessage(string name, ushort value)

Treats ushort as encoded signal of a message for CAN bus and decodes it.

double DecodeMessage(string name, int value)

Treats int as encoded signal of a message for CAN bus and decodes it.

double DecodeMessage(string name, uint value)

Treats uint as encoded signal of a message for CAN bus and decodes it.

double DecodeMessage(string name, long value)

Treats long as encoded signal of a message for CAN bus and decodes it.

double DecodeMessage(string name, ulong value)

Treats ulong as encoded signal of a message for CAN bus and decodes it.

DateTimeOffset? FromTimestamp(ulong timestamp, string resolution)

Converts timestamp to date time offset.

DateTimeOffset? ToDateTimeOffset(string date, string format)

Creates the date time offset from given date and time in a given format.

Standard Methods

Base methods constitute the fundamental function set inherited by all data sources in Musoq. These methods provide core functionality such as type conversions, mathematical operations, and string manipulations. They are automatically available alongside any data source-specific methods. The following base methods are supported:

Aggregation methods

Aggregation methods process multiple rows to compute a single result value. These methods are used with GROUP BY clauses to summarize data across row groups. Below are the aggregation methods supported by this data source:

string AggregateValues(string name)

Aggregates values into a single value.

string AggregateValues(string name, int parent)

Aggregates values into a single value.

Decimal Avg(string name)

Gets the aggregated average value from the given group name

Decimal Avg(string name, int parent)

Gets the aggregated average value from the given group name

int Count(string name)

Gets the count value of a given group.

int Count(string name, int parent)

Gets the count value of a given group.

DateTimeOffset? MaxDateTimeOffset(string name, int parent)

Retrieves the maximum DateTimeOffset value from the specified group.

DateTimeOffset? MaxDateTimeOffset(string name)

Retrieves the maximum DateTimeOffset value from the specified group.

DateTimeOffset? MinDateTimeOffset(string name, int parent)

Retrieves the minimum DateTimeOffset value from the specified group.

DateTimeOffset? MinDateTimeOffset(string name)

Retrieves the minimum DateTimeOffset value from the specified group.

Decimal Max(string name)

Gets the max value of a given group.

Decimal Max(string name, int parent)

Gets the max value of a given group.

Decimal Min(string name)

Gets the min value of a given group.

Decimal Min(string name, int parent)

Gets the min value of a given group.

Decimal StDev(string name, int parent)

Gets the StDev value of a given group.

Decimal Sum(string name)

Gets the sum value of a given group.

Decimal Sum(string name, int parent)

Gets the sum value of a given group.

Decimal SumIncome(string name)

Gets the sum value of a given group.

Decimal SumIncome(string name, int parent)

Gets the sum value of a given group.

Decimal SumOutcome(string name)

Gets the outcome value of a given group.

Decimal SumOutcome(string name, int parent)

Gets the outcome value of a given group.

TimeSpan? SumTimeSpan(string name)

Gets the sum value of a given group.

TimeSpan? SumTimeSpan(string name, int parent)

Gets the sum value of a given group.

TimeSpan? MinTimeSpan(string name)

Gets the min value of a given group.

TimeSpan? MinTimeSpan(string name, int parent)

Gets the min value of a given group.

TimeSpan? MaxTimeSpan(string name)

Gets the max value of a given group.

TimeSpan? MaxTimeSpan(string name, int parent)

Gets the max value of a given group.

IEnumerable<T> Window<T>(string name)

Gets the window

Non aggregation methods

Non-aggregation methods process data on a row-by-row basis, performing calculations or transformations for each individual row. These methods return a result for each input row. The following non-aggregation methods are available:

int RowNumber()

Gets the row number of the current row.

string GetTypeName(object obj)

Gets the typename of passed object.

byte? ShiftLeft(byte? value, int shift)

Shifts the value to the left by the specified number of bits.

short? ShiftLeft(short? value, int shift)

Shifts the value to the left by the specified number of bits.

int? ShiftLeft(int? value, int shift)

Shifts the value to the left by the specified number of bits.

long? ShiftLeft(long? value, int shift)

Shifts the value to the left by the specified number of bits.

sbyte? ShiftLeft(sbyte? value, int shift)

Shifts the value to the left by the specified number of bits.

ushort? ShiftLeft(ushort? value, int shift)

Shifts the value to the left by the specified number of bits.

uint? ShiftLeft(uint? value, int shift)

Shifts the value to the left by the specified number of bits.

ulong? ShiftLeft(ulong? value, int shift)

Shifts the value to the left by the specified number of bits.

byte? ShiftRight(byte? value, int shift)

Shifts the value to the right by the specified number of bits.

short? ShiftRight(short? value, int shift)

Shifts the value to the right by the specified number of bits.

int? ShiftRight(int? value, int shift)

Shifts the value to the right by the specified number of bits.

long? ShiftRight(long? value, int shift)

Shifts the value to the right by the specified number of bits.

sbyte? ShiftRight(sbyte? value, int shift)

Shifts the value to the right by the specified number of bits.

ushort? ShiftRight(ushort? value, int shift)

Shifts the value to the right by the specified number of bits.

uint? ShiftRight(uint? value, int shift)

Shifts the value to the right by the specified number of bits.

ulong? ShiftRight(ulong? value, int shift)

Shifts the value to the right by the specified number of bits.

byte? Not(byte? value)

Performs bitwise NOT operation on a given value.

short? Not(short? value)

Performs bitwise NOT operation on a given value.

int? Not(int? value)

Performs bitwise NOT operation on a given value.

long? Not(long? value)

Performs bitwise NOT operation on a given value.

sbyte? Not(sbyte? value)

Performs bitwise NOT operation on a given value.

ushort? Not(ushort? value)

Performs bitwise NOT operation on a given value.

uint? Not(uint? value)

Performs bitwise NOT operation on a given value.

ulong? Not(ulong? value)

Performs bitwise NOT operation on a given value.

byte? And(byte? left, byte? right)

Performs bitwise AND operation on two given values.

int? And(byte? left, sbyte? right)

Performs bitwise AND operation on two given values.

int? And(byte? left, short? right)

Performs bitwise AND operation on two given values.

int? And(byte? left, ushort? right)

Performs bitwise AND operation on two given values.

int? And(byte? left, int? right)

Performs bitwise AND operation on two given values.

uint? And(byte? left, uint? right)

Performs bitwise AND operation on two given values.

long? And(byte? left, long? right)

Performs bitwise AND operation on two given values.

ulong? And(byte? left, ulong? right)

Performs bitwise AND operation on two given values.

int? And(sbyte? left, byte? right)

Performs bitwise AND operation on two given values.

sbyte? And(sbyte? left, sbyte? right)

Performs bitwise AND operation on two given values.

int? And(sbyte? left, short? right)

Performs bitwise AND operation on two given values.

int? And(sbyte? left, ushort? right)

Performs bitwise AND operation on two given values.

int? And(sbyte? left, int? right)

Performs bitwise AND operation on two given values.

uint? And(sbyte? left, uint? right)

Performs bitwise AND operation on two given values.

long? And(sbyte? left, long? right)

Performs bitwise AND operation on two given values.

int? And(short? left, byte? right)

Performs bitwise AND operation on two given values.

int? And(short? left, sbyte? right)

Performs bitwise AND operation on two given values.

short? And(short? left, short? right)

Performs bitwise AND operation on two given values.

int? And(short? left, ushort? right)

Performs bitwise AND operation on two given values.

int? And(short? left, int? right)

Performs bitwise AND operation on two given values.

uint? And(short? left, uint? right)

Performs bitwise AND operation on two given values.

long? And(short? left, long? right)

Performs bitwise AND operation on two given values.

int? And(ushort? left, byte? right)

Performs bitwise AND operation on two given values.

int? And(ushort? left, sbyte? right)

Performs bitwise AND operation on two given values.

int? And(ushort? left, short? right)

Performs bitwise AND operation on two given values.

ushort? And(ushort? left, ushort? right)

Performs bitwise AND operation on two given values.

int? And(ushort? left, int? right)

Performs bitwise AND operation on two given values.

uint? And(ushort? left, uint? right)

Performs bitwise AND operation on two given values.

long? And(ushort? left, long? right)

Performs bitwise AND operation on two given values.

ulong? And(ushort? left, ulong? right)

Performs bitwise AND operation on two given values.

int? And(int? left, byte? right)

Performs bitwise AND operation on two given values.

int? And(int? left, sbyte? right)

Performs bitwise AND operation on two given values.

int? And(int? left, short? right)

Performs bitwise AND operation on two given values.

int? And(int? left, ushort? right)

Performs bitwise AND operation on two given values.

int? And(int? left, int? right)

Performs bitwise AND operation on two given values.

uint? And(int? left, uint? right)

Performs bitwise AND operation on two given values.

long? And(int? left, long? right)

Performs bitwise AND operation on two given values.

uint? And(uint? left, uint? right)

Performs bitwise AND operation on two given values.

uint? And(uint? left, byte? right)

Performs bitwise AND operation on two given values.

uint? And(uint? left, sbyte? right)

Performs bitwise AND operation on two given values.

uint? And(uint? left, short? right)

Performs bitwise AND operation on two given values.

uint? And(uint? left, ushort? right)

Performs bitwise AND operation on two given values.

uint? And(uint? left, int? right)

Performs bitwise AND operation on two given values.

ulong? And(uint? left, long? right)

Performs bitwise AND operation on two given values.

ulong? And(uint? left, ulong? right)

Performs bitwise AND operation on two given values.

long? And(long? left, long? right)

Performs bitwise AND operation on two given values.

long? And(long? left, byte? right)

Performs bitwise AND operation on two given values.

long? And(long? left, sbyte? right)

Performs bitwise AND operation on two given values.

long? And(long? left, short? right)

Performs bitwise AND operation on two given values.

long? And(long? left, ushort? right)

Performs bitwise AND operation on two given values.

long? And(long? left, int? right)

Performs bitwise AND operation on two given values.

long? And(long? left, uint? right)

Performs bitwise AND operation on two given values.

ulong? And(ulong? left, byte? right)

Performs bitwise AND operation on two given values.

ulong? And(ulong? left, ushort? right)

Performs bitwise AND operation on two given values.

ulong? And(ulong? left, uint? right)

Performs bitwise AND operation on two given values.

ulong? And(ulong? left, ulong? right)

Performs bitwise AND operation on two given values.

byte? Or(byte? left, byte? right)

Performs bitwise OR operation on two given values.

int? Or(byte? left, sbyte? right)

Performs bitwise OR operation on two given values.

int? Or(byte? left, short? right)

Performs bitwise OR operation on two given values.

int? Or(byte? left, ushort? right)

Performs bitwise OR operation on two given values.

int? Or(byte? left, int? right)

Performs bitwise OR operation on two given values.

uint? Or(byte? left, uint? right)

Performs bitwise OR operation on two given values.

long? Or(byte? left, long? right)

Performs bitwise OR operation on two given values.

ulong? Or(byte? left, ulong? right)

Performs bitwise OR operation on two given values.

int? Or(sbyte? left, byte? right)

Performs bitwise OR operation on two given values.

sbyte? Or(sbyte? left, sbyte? right)

Performs bitwise OR operation on two given values.

int? Or(sbyte? left, short? right)

Performs bitwise OR operation on two given values.

int? Or(sbyte? left, ushort? right)

Performs bitwise OR operation on two given values.

int? Or(sbyte? left, int? right)

Performs bitwise OR operation on two given values.

uint? Or(sbyte? left, uint? right)

Performs bitwise OR operation on two given values.

long? Or(sbyte? left, long? right)

Performs bitwise OR operation on two given values.

int? Or(short? left, byte? right)

Performs bitwise OR operation on two given values.

int? Or(short? left, sbyte? right)

Performs bitwise OR operation on two given values.

short? Or(short? left, short? right)

Performs bitwise OR operation on two given values.

int? Or(short? left, ushort? right)

Performs bitwise OR operation on two given values.

int? Or(short? left, int? right)

Performs bitwise OR operation on two given values.

uint? Or(short? left, uint? right)

Performs bitwise OR operation on two given values.

long? Or(short? left, long? right)

Performs bitwise OR operation on two given values.

int? Or(ushort? left, byte? right)

Performs bitwise OR operation on two given values.

int? Or(ushort? left, sbyte? right)

Performs bitwise OR operation on two given values.

int? Or(ushort? left, short? right)

Performs bitwise OR operation on two given values.

ushort? Or(ushort? left, ushort? right)

Performs bitwise OR operation on two given values.

int? Or(ushort? left, int? right)

Performs bitwise OR operation on two given values.

uint? Or(ushort? left, uint? right)

Performs bitwise OR operation on two given values.

long? Or(ushort? left, long? right)

Performs bitwise OR operation on two given values.

ulong? Or(ushort? left, ulong? right)

Performs bitwise OR operation on two given values.

int? Or(int? left, byte? right)

Performs bitwise OR operation on two given values.

int? Or(int? left, sbyte? right)

Performs bitwise OR operation on two given values.

int? Or(int? left, short? right)

Performs bitwise OR operation on two given values.

int? Or(int? left, ushort? right)

Performs bitwise OR operation on two given values.

int? Or(int? left, int? right)

Performs bitwise OR operation on two given values.

uint? Or(int? left, uint? right)

Performs bitwise OR operation on two given values.

long? Or(int? left, long? right)

Performs bitwise OR operation on two given values.

uint? Or(uint? left, uint? right)

Performs bitwise OR operation on two given values.

uint? Or(uint? left, byte? right)

Performs bitwise OR operation on two given values.

uint? Or(uint? left, sbyte? right)

Performs bitwise OR operation on two given values.

uint? Or(uint? left, short? right)

Performs bitwise OR operation on two given values.

uint? Or(uint? left, ushort? right)

Performs bitwise OR operation on two given values.

uint? Or(uint? left, int? right)

Performs bitwise OR operation on two given values.

ulong? Or(uint? left, long? right)

Performs bitwise OR operation on two given values.

ulong? Or(uint? left, ulong? right)

Performs bitwise OR operation on two given values.

long? Or(long? left, long? right)

Performs bitwise OR operation on two given values.

long? Or(long? left, byte? right)

Performs bitwise OR operation on two given values.

long? Or(long? left, sbyte? right)

Performs bitwise OR operation on two given values.

long? Or(long? left, short? right)

Performs bitwise OR operation on two given values.

long? Or(long? left, ushort? right)

Performs bitwise OR operation on two given values.

long? Or(long? left, int? right)

Performs bitwise OR operation on two given values.

long? Or(long? left, uint? right)

Performs bitwise OR operation on two given values.

ulong? Or(ulong? left, byte? right)

Performs bitwise OR operation on two given values.

ulong? Or(ulong? left, ushort? right)

Performs bitwise OR operation on two given values.

ulong? Or(ulong? left, uint? right)

Performs bitwise OR operation on two given values.

ulong? Or(ulong? left, ulong? right)

Performs bitwise OR operation on two given values.

byte? Xor(byte? left, byte? right)

Performs bitwise OR operation on two given values.

int? Xor(byte? left, sbyte? right)

Performs bitwise Xor operation on two given values.

int? Xor(byte? left, short? right)

Performs bitwise Xor operation on two given values.

int? Xor(byte? left, ushort? right)

Performs bitwise Xor operation on two given values.

int? Xor(byte? left, int? right)

Performs bitwise Xor operation on two given values.

uint? Xor(byte? left, uint? right)

Performs bitwise Xor operation on two given values.

long? Xor(byte? left, long? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(byte? left, ulong? right)

Performs bitwise Xor operation on two given values.

int? Xor(sbyte? left, byte? right)

Performs bitwise Xor operation on two given values.

sbyte? Xor(sbyte? left, sbyte? right)

Performs bitwise Xor operation on two given values.

int? Xor(sbyte? left, short? right)

Performs bitwise Xor operation on two given values.

int? Xor(sbyte? left, ushort? right)

Performs bitwise Xor operation on two given values.

int? Xor(sbyte? left, int? right)

Performs bitwise Xor operation on two given values.

uint? Xor(sbyte? left, uint? right)

Performs bitwise Xor operation on two given values.

long? Xor(sbyte? left, long? right)

Performs bitwise Xor operation on two given values.

int? Xor(short? left, byte? right)

Performs bitwise Xor operation on two given values.

int? Xor(short? left, sbyte? right)

Performs bitwise Xor operation on two given values.

short? Xor(short? left, short? right)

Performs bitwise Xor operation on two given values.

int? Xor(short? left, ushort? right)

Performs bitwise XOR operation on two given values.

int? Xor(short? left, int? right)

Performs bitwise Xor operation on two given values.

uint? Xor(short? left, uint? right)

Performs bitwise Xor operation on two given values.

long? Xor(short? left, long? right)

Performs bitwise Xor operation on two given values.

int? Xor(ushort? left, byte? right)

Performs bitwise Xor operation on two given values.

int? Xor(ushort? left, sbyte? right)

Performs bitwise Xor operation on two given values.

int? Xor(ushort? left, short? right)

Performs bitwise Xor operation on two given values.

ushort? Xor(ushort? left, ushort? right)

Performs bitwise Xor operation on two given values.

int? Xor(ushort? left, int? right)

Performs bitwise Xor operation on two given values.

uint? Xor(ushort? left, uint? right)

Performs bitwise Xor operation on two given values.

long? Xor(ushort? left, long? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(ushort? left, ulong? right)

Performs bitwise Xor operation on two given values.

int? Xor(int? left, byte? right)

Performs bitwise Xor operation on two given values.

int? Xor(int? left, sbyte? right)

Performs bitwise Xor operation on two given values.

int? Xor(int? left, short? right)

Performs bitwise Xor operation on two given values.

int? Xor(int? left, ushort? right)

Performs bitwise Xor operation on two given values.

int? Xor(int? left, int? right)

Performs bitwise Xor operation on two given values.

uint? Xor(int? left, uint? right)

Performs bitwise Xor operation on two given values.

long? Xor(int? left, long? right)

Performs bitwise Xor operation on two given values.

uint? Xor(uint? left, uint? right)

Performs bitwise Xor operation on two given values.

uint? Xor(uint? left, byte? right)

Performs bitwise Xor operation on two given values.

uint? Xor(uint? left, sbyte? right)

Performs bitwise Xor operation on two given values.

uint? Xor(uint? left, short? right)

Performs bitwise Xor operation on two given values.

uint? Xor(uint? left, ushort? right)

Performs bitwise Xor operation on two given values.

uint? Xor(uint? left, int? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(uint? left, long? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(uint? left, ulong? right)

Performs bitwise Xor operation on two given values.

long? Xor(long? left, long? right)

Performs bitwise Xor operation on two given values.

long? Xor(long? left, byte? right)

Performs bitwise Xor operation on two given values.

long? Xor(long? left, sbyte? right)

Performs bitwise Xor operation on two given values.

long? Xor(long? left, short? right)

Performs bitwise Xor operation on two given values.

long? Xor(long? left, ushort? right)

Performs bitwise Xor operation on two given values.

long? Xor(long? left, int? right)

Performs bitwise Xor operation on two given values.

long? Xor(long? left, uint? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(ulong? left, ulong? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(ulong? left, byte? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(ulong? left, ushort? right)

Performs bitwise Xor operation on two given values.

ulong? Xor(ulong? left, uint? right)

Performs bitwise Xor operation on two given values.

byte[] GetBytes(string content)

Gets the bytes from the given string.

byte[] GetBytes(string content, int length, int offset)

Gets the bytes from the given string within given offset and length.

byte[] GetBytes(char? character)

Gets the bytes from the given character.

byte[] GetBytes(bool? bit)

Gets the bytes from the given boolean.

byte[] GetBytes(long? value)

Gets the bytes from the given long.

byte[] GetBytes(int? value)

Gets the bytes from the given int.

byte[] GetBytes(short? value)

Gets the bytes from the given short.

byte[] GetBytes(ulong? value)

Gets the bytes from the given ulong.

byte[] GetBytes(ushort? value)

Gets the bytes from the given ushort.

byte[] GetBytes(uint? value)

Gets the bytes from the given uint.

byte[] GetBytes(Decimal? value)

Gets the bytes from the given decimal.

byte[] GetBytes(double? value)

Gets the bytes from the given double.

byte[] GetBytes(float? value)

Gets the bytes from the given float.

string ToBin(byte[] bytes, string delimiter)

Converts given bytes to binary with defined delimiter

string ToBin<T>(T value)

Converts given value to binary

string ToOcta<T>(T value)

Converts given value to octal

string ToDec<T>(T value)

Converts given value to decimal

string ToBase64(byte[] value)

Converts given value to string

string ToBase64(byte[] value, int offset, int length)

Converts given array of bytes to string

byte[] FromBase64(string value)

Converts given string to bytes array

bool FromBytesToBool(byte[] value)

Converts bytes to boolean value.

short FromBytesToInt16(byte[] value)

Converts bytes to a 16-bit signed integer.

ushort FromBytesToUInt16(byte[] value)

Converts bytes to a 16-bit unsigned integer.

int FromBytesToInt32(byte[] value)

Converts bytes to a 32-bit signed integer.

uint FromBytesToUInt32(byte[] value)

Converts bytes to a 32-bit unsigned integer.

long FromBytesToInt64(byte[] value)

Converts bytes to a 64-bit signed integer.

ulong FromBytesToUInt64(byte[] value)

Converts bytes to a 64-bit unsigned integer.

float FromBytesToFloat(byte[] value)

Converts bytes to a float value.

double FromBytesToDouble(byte[] value)

Converts bytes to a float value.

string FromBytesToString(byte[] value)

Converts bytes to a string.

byte[] ToBytes(bool value)

Converts boolean value to bytes.

byte[] ToBytes(short value)

Converts short value to bytes.

byte[] ToBytes(ushort value)

Converts ushort value to bytes.

byte[] ToBytes(int value)

Converts int value to bytes.

byte[] ToBytes(uint value)

Converts uint value to bytes.

byte[] ToBytes(long value)

Converts long value to bytes.

byte[] ToBytes(ulong value)

Converts long value to bytes.

string ToHex(byte[] bytes, string delimiter)

Converts given bytes to hex with defined delimiter

string ToHex<T>(T value)

Converts given value to binary

int ExtractFromDate(string date, string partOfDate)

Extracts part of the date from the date

int ExtractFromDate(string date, string culture, string partOfDate)

Extracts part of the date from the date based on given culture

DateTimeOffset? GetDate()

Gets the current datetime

DateTimeOffset? UtcGetDate()

Gets the current datetime in UTC

int? Month(DateTimeOffset? value)

Gets the month from DateTimeOffset

int? Year(DateTimeOffset? value)

Gets the year from DateTimeOffset

int? Day(DateTimeOffset? value)

Gets the day from DateTimeOffset

int? Hour(DateTimeOffset? value)

Gets the hour from DateTimeOffset

int? Minute(DateTimeOffset? value)

Gets the minute from DateTimeOffset

int? Second(DateTimeOffset? value)

Gets the second from DateTimeOffset

int? Milliseconds(DateTimeOffset? value)

Gets the millisecond from DateTimeOffset

int? DayOfWeek(DateTimeOffset? value)

Gets the day of week from DateTimeOffset

TimeSpan? ExtractTimeSpan(DateTimeOffset? dateTimeOffset)

Extracts time from DateTimeOffset

DateTimeOffset? ToDateTimeOffset(string value)

Converts the given value to DateTimeOffset using the current culture.

DateTimeOffset? ToDateTimeOffset(string value, string culture)

Converts the given value to DateTimeOffset using the specified culture.

TimeSpan? SubtractDateTimeOffsets(DateTimeOffset? first, DateTimeOffset? second)

Subtracts the first DateTimeOffset from the second DateTimeOffset.

IEnumerable<T> Skip<T>(IEnumerable<T> values, int skipCount)

Skips elements from the beginning of the sequence.

IEnumerable<T> Take<T>(IEnumerable<T> values, int takeCount)

Takes elements from the beginning of the sequence.

IEnumerable<T> SkipAndTake<T>(IEnumerable<T> values, int skipCount, int takeCount)

Skip and takes elements from the beginning of the sequence.

T[] EnumerableToArray<T>(IEnumerable<T> values)

Turn array arguments of T into a single array.

T[] MergeArrays<T>(T[][] values)

Turn array arguments of T into a single array.

IEnumerable<T> LongestCommonSequence<T>(IEnumerable<T> source, IEnumerable<T> pattern)

Computes longest common sequence of two given sequences

T GetElementAtOrDefault<T>(IEnumerable<T> enumerable, int? index)

Gets the element at the specified index in a sequence

int? Length<T>(IEnumerable<T> enumerable)

Gets the length of the sequence

int? Length<T>(T[] array)

Gets the length of the array

T Choose<T>(int index, T[] values)

Gets the value of an array at the specified index

T If<T>(bool expressionResult, T a, T b)

Chose a or b value based on the expression result

bool? Match(string regex, string content)

Determine whether content matches the specified pattern

byte? Coalesce(byte?[] array)

Gets the first non-null value in a list

sbyte? Coalesce(sbyte?[] array)

Gets the first non-null value in a list

short? Coalesce(short?[] array)

Gets the first non-null value in a list

ushort? Coalesce(ushort?[] array)

Gets the first non-null value in a list

int? Coalesce(int?[] array)

Gets the first non-null value in a list

Decimal? Coalesce(uint?[] array)

Gets the first non-null value in a list

Decimal? Coalesce(long?[] array)

Gets the first non-null value in a list

Decimal? Coalesce(ulong?[] array)

Gets the first non-null value in a list

Decimal? Coalesce(Decimal?[] array)

Gets the first non-null value in a list

T Coalesce<T>(T[] array)

Gets the first non-null value in a list

IEnumerable<T> Distinct<T>(IEnumerable<T> values)

Returns distinct elements from a collection.

string Md5(string content)

Gets the md5 hash of the given string.

string Md5(byte[] content)

Gets the md5 hash of the given bytes array.

string Sha1(string content)

Gets the sha256 hash of the given string.

string Sha1(byte[] content)

Gets the sha256 hash of the given bytes array.

string Sha256(string content)

Gets the sha256 hash of the given string.

string Sha256(byte[] content)

Gets the sha256 hash of the given bytes array.

string Sha512(string content)

Gets the sha256 hash of the given string.

string Sha512(byte[] content)

Gets the sha256 hash of the bytes array.

string ToJson<T>(T obj)

Converts object to json.

string[] ExtractFromJsonToArray(string json, string path)

Extracts values from json by path.

string ExtractFromJson(string json, string path)

Extracts values from json by path and joins them with comma.

Decimal? Abs(Decimal? value)

Gets the absolute value

long? Abs(long? value)

Gets the absolute value

int? Abs(int? value)

Gets the absolute value

Decimal? Ceil(Decimal? value)

Gets the ceiling value

Decimal? Floor(Decimal? value)

Gets the floor value

Decimal? Sign(Decimal? value)

Determine whether value is greater, equal or less that zero

long? Sign(long? value)

Determine whether value is greater, equal or less that zero

Decimal? Round(Decimal? value, int precision)

Rounds the value within given precision

Decimal? PercentOf(Decimal? value, Decimal? max)

Gets the percentage of the value

int Rand()

Gets the random integer value

int? Rand(int? min, int? max)

Gets the random integer value

double? Pow(Decimal? x, Decimal? y)

Computes the pow between two values

double? Pow(double? x, double? y)

Computes the pow between two values

double? Sqrt(Decimal? x)

Computes the sqrt of a given value

double? Sqrt(double? x)

Computes the sqrt of a given value

double? Sqrt(long? x)

Computes the sqrt of a given value

double? PercentRank<T>(IEnumerable<T> window, T value)

Computes the percent rank of a given window

double? Log(Decimal? base, Decimal? value)

Calculates the logarithm of a value with a specified base.

Decimal? Sin(Decimal? value)

Calculates sine of a value.

double? Sin(double? value)

Calculates sine of a value.

float? Sin(float? value)

Calculates sine of a value.

Decimal? Cos(Decimal? value)

Calculates cosine of a value.

double? Cos(double? value)

Calculates cosine of a value.

float? Cos(float? value)

Calculates cosine of a value.

string NewId()

Gets the new identifier

string Trim(string value)

Removes leading and trailing whitespace from a string.

string TrimStart(string value)

Removes leading whitespace from a string.

string TrimEnd(string value)

Removes trailing whitespace from a string.

string Substring(string value, int? index, int? length)

Gets the substring from the string.

string Substring(string value, int? length)

Gets the substring from the string

string Concat(string[] strings)

Concatenates the specified values

string Concat(char[] characters)

Concatenates the specified characters

string Concat(string firstString, char[] chars)

Concatenates specified string first characters

string Concat(char? firstChar, string[] strings)

Concatenate specific character with strings

string Concat(object[] objects)

Concatenates the specified strings

string Concat<T>(T[] objects)

Concatenates the specified strings

bool? Contains(string content, string what)

Determine whether the string contains the specified value

int? IndexOf(string value, string text)

Position of the first occurrence of the specified value

string Soundex(string value)

Computes soundex for the specified value

bool HasFuzzyMatchedWord(string text, string word, string separator)

Matches the specified text by splitting it with separator and applying fuzzy comparison

bool HasWordThatHasSmallerLevenshteinDistanceThan(string text, string word, int distance, string separator)

Matches the specified text by splitting it with separator and applying fuzzy comparison with a given distance

bool HasWordThatSoundLike(string text, string word, string separator)

Matches whether the specified word is present after being fuzzified within the specified text

bool HasTextThatSoundLikeSentence(string text, string sentence, string separator)

Matches whether the specified text is present in sentence after being fuzified

string ToUpper(string value)

Makes the string uppercase

string ToUpper(string value, string culture)

Makes the string uppercase within specified culture

string ToUpperInvariant(string value)

Makes the string uppercase

string ToLower(string value)

Makes the string lowercase

string ToLower(string value, string culture)

Makes the string lowercase within specified culture

string ToLowerInvariant(string value)

Makes the string lowercase

string PadLeft(string value, string character, int? totalWidth)

Returns a new string that right-aligns the characters in this instance by padding them on the left with a specified Unicode character, for a specified total lengt

string PadRight(string value, string character, int? totalWidth)

Returns a new string that left-aligns the characters in this instance by padding them on the right with a specified Unicode character, for a specified total length

string Head(string value, int? length)

Gets the first N characters of the string

string Tail(string value, int? length)

Gets the last N characters of the string

int? LevenshteinDistance(string firstValue, string secondValue)

Computes the Levenshtein distance between two strings

char? GetCharacterOf(string value, int index)

Gets the character at specified index

string Reverse(string value)

Reverses the string

string[] Split(string value, string[] separators)

Splits the string into an array of substrings based on the specified separators

char[] ToCharArray(string value)

Splits the string into an array of characters

string LongestCommonSubstring(string source, string pattern)

Computes the longest common subsequence between two source and pattern

string Replicate(string value, int integer)

Clones the value n times

string Translate(string value, string characters, string translations)

Returns the string from the first argument after the characters specified in the second argument are translated into the characters specified in the third argument.

string Replace(string text, string lookFor, string changeTo)

Replaces the first occurrence of a specified string in this instance with another specified string

string ToTitleCase(string value)

Capitalizes the first letter of the string

string GetNthWord(string text, int wordIndex, string separator)

Gets the nth word of the string

string GetFirstWord(string text, string separator)

Gets the first word of the string

string GetSecondWord(string text, string separator)

Gets the second word of the string

string GetThirdWord(string text, string separator)

Gets the third word of the string

string GetLastWord(string text, string separator)

Gets last word of the string

bool IsNullOrEmpty(string value)

Determines whether the string is null or empty

bool IsNullOrWhiteSpace(string value)

Determines whether the string is null or whitespace

string UrlEncode(string value)

Encodes the value

string UrlDecode(string value)

Decodes the value

string UriEncode(string value)

Encodes the value

string UriDecode(string value)

Decodes the value

bool? StartsWith(string value, string prefix)

Determines whether the string starts with the specified prefix

bool? StartsWith(string value, string prefix, string comparison)

Determines whether the string starts with the specified prefix

bool? EndsWith(string value, string suffix)

Determines whether the string ends with the specified suffix

bool? EndsWith(string value, string suffix, string comparison)

Determines whether the string ends with the specified suffix

string RegexReplace(string value, string pattern, string replacement)

Replace the specified value part that matches the pattern with the replacement

string[] SplitByLinuxNewLines(string input)

Split string by Linux-style newlines (\n)

string[] SplitByWindowsNewLines(string input)

Split string by Windows-style newlines (\r\n)

string[] SplitByNewLines(string input)

Smart split that handles both Windows (\r\n) and Linux (\n) newlines

string StringsJoin(string separator, string[] values)

Joins the specified values with the separator

string StringsJoin(string separator, IEnumerable<string> values)

Joins the specified values with the separator

TimeSpan? AddTimeSpans(TimeSpan?[] timeSpans)

Adds a given set of time spans.

TimeSpan? SubtractTimeSpans(TimeSpan?[] timeSpans)

Subtracts a given set of time spans.

TimeSpan? FromString(string timeSpan)

Turns a string into a time span.

char? ToChar(string value)

Converts given value to character

char? ToChar(int? value)

Converts given value to character

char? ToChar(short? value)

Converts given value to character

char? ToChar(byte? value)

Converts given value to character

char? ToChar(object value)

Converts given value to character

DateTime? ToDateTime(string value)

Converts given value to DateTime

DateTime? ToDateTime(string value, string culture)

Converts given value to DateTime

TimeSpan? SubtractDates(DateTime? date1, DateTime? date2)

Subtracts two DateTime values and returns the difference as a TimeSpan

Decimal? ToDecimal(string value)

Converts given value to decimal

Decimal? ToDecimal(string value, string culture)

Converts given value to decimal withing given culture

Decimal? ToDecimal(byte? value)

Converts given value to Decimal

Decimal? ToDecimal(sbyte? value)

Converts given value to Decimal

Decimal? ToDecimal(short? value)

Converts given value to Decimal

Decimal? ToDecimal(ushort? value)

Converts given value to Decimal

Decimal? ToDecimal(long? value)

Converts given value to Decimal

Decimal? ToDecimal(ulong? value)

Converts given value to Decimal

Decimal? ToDecimal(float? value)

Converts given value to Decimal

Decimal? ToDecimal(double? value)

Converts given value to Decimal

Decimal? ToDecimal(object value)

Converts given value to Decimal

double? ToDouble(object value)

Converts given value to double

double? ToDouble(string value)

Converts given value to double

double? ToDouble(byte? value)

Converts given value to double

double? ToDouble(sbyte? value)

Converts given value to double

double? ToDouble(short? value)

Converts given value to double

double? ToDouble(ushort? value)

Converts given value to double

double? ToDouble(int? value)

Converts given value to double

double? ToDouble(uint? value)

Converts given value to double

double? ToDouble(long? value)

Converts given value to double

double? ToDouble(ulong? value)

Converts given value to double

double? ToDouble(float? value)

Converts given value to double

double? ToDouble(double? value)

Converts given value to double

double? ToDouble(Decimal? value)

Converts given value to double

float? ToFloat(string value)

Converts given value to float

float? ToFloat(byte? value)

Converts given value to float

float? ToFloat(sbyte? value)

Converts given value to float

float? ToFloat(short? value)

Converts given value to float

float? ToFloat(ushort? value)

Converts given value to float

float? ToFloat(int? value)

Converts given value to float

float? ToFloat(uint? value)

Converts given value to float

float? ToFloat(long? value)

Converts given value to float

float? ToFloat(ulong? value)

Converts given value to float

float? ToFloat(float? value)

Converts given value to float

float? ToFloat(Decimal? value)

Converts given value to float

int? ToInt32(string value)

Converts given value to int

int? ToInt32(byte? value)

Converts given value to int

int? ToInt32(sbyte? value)

Converts given value to int

int? ToInt32(short? value)

Converts given value to int

int? ToInt32(ushort? value)

Converts given value to int

int? ToInt32(int? value)

Converts given value to int

int? ToInt32(uint? value)

Converts given value to int

int? ToInt32(long? value)

Converts given value to int

int? ToInt32(ulong? value)

Converts given value to int

int? ToInt32(float? value)

Converts given value to int

int? ToInt32(double? value)

Converts given value to int

int? ToInt32(Decimal? value)

Converts given value to int

int? ToInt32(object value)

Converts given value to int

long? ToInt64(string value)

Converts given value to Int64

long? ToInt64(byte? value)

Converts given value to long

long? ToInt64(sbyte? value)

Converts given value to long

long? ToInt64(short? value)

Converts given value to long

long? ToInt64(ushort? value)

Converts given value to long

long? ToInt64(int? value)

Converts given value to long

long? ToInt64(uint? value)

Converts given value to long

long? ToInt64(long? value)

Converts given value to long

long? ToInt64(ulong? value)

Converts given value to long

long? ToInt64(float? value)

Converts given value to long

long? ToInt64(double? value)

Converts given value to long

long? ToInt64(Decimal? value)

Converts given value to long

long? ToInt64(object value)

Converts given value to long

string ToString(char? value)

Converts given value to string

string ToString(DateTimeOffset? value)

Converts given value to string

string ToString(DateTimeOffset? value, string format)

Converts given value to string

string ToString(byte? value)

Converts given value to string

string ToString(byte? value, string format)

Converts given value to string

string ToString(sbyte? value)

Converts given value to string

string ToString(sbyte? value, string format)

Converts given value to string

string ToString(int? value)

Converts given value to string

string ToString(int? value, string format)

Converts given value to string

string ToString(uint? value)

Converts given value to string

string ToString(uint? value, string format)

Converts given value to string

string ToString(long? value)

Converts given value to string

string ToString(long? value, string format)

Converts given value to string

string ToString(ulong? value)

Converts given value to string

string ToString(ulong? value, string format)

Converts given value to string

string ToString(float? value)

Converts given value to string

string ToString(float? value, string format)

Converts given value to string

string ToString(double? value)

Converts given value to string

string ToString(double? value, string format)

Converts given value to string

string ToString(Decimal? value)

Converts given value to string

string ToString(Decimal? value, string format)

Converts given value to string

string ToString(bool? value)

Converts given value to string

string ToString(object value)

Converts given value to string

string ToString<T>(T value)

Converts given value to string

string ToString(string[] value)

Converts given value to string

string ToString<T>(T[] value)

Converts given value to string

TimeSpan? ToTimeSpan(string value)

Converts given value to TimeSpan

TimeSpan? ToTimeSpan(string value, string culture)

Converts given value to TimeSpan